Kingneed | RFID-Powered Passive Optical Network Intelligence
Kingneed makes fiber networks smarter: RFID auto-scanning hardware,
fiber path digital twin and a central NMS / cloud OSS platform turn
passive optical network assets into visible, manageable, controllable
and valuable digital resources.
RFID Auto-Scanner for Fiber Port Management
A plug-and-play passive RFID retrofit kit that clips onto live ODF and
MMR frames with no rewiring and no downtime. Three hardware pieces work
together: clip-on passive RFID tags with snap-on digital IDs, a
rack-mounted auto-scanner that reads 1,000+ ports in about 20 seconds,
and a secure LAN gateway that streams occupancy, mapping and plug or
unplug events into your DCIM / OSS through open APIs.
What the Solution Includes
- Core solution components: sub-control board (standard ODF / sub-rack compatible), main control unit, passive RFID tags and a central NMS / cloud OSS platform.
- Mobile field operations and a fiber path digital twin for end-to-end path tracing, port occupancy lookup and real-time relationship verification.
- Operational efficiency benchmarks measured in live carrier networks.
- Survey, planning and platform intelligence: topology computation, route pre-validation and rapid fault restoration.
Measured Field Benchmarks
- Field survey and tagging: 172 minutes to 30 minutes.
- Information audit and entry: 112 minutes to 5 seconds.
- Service provisioning: 1 day to 3 hours.
- Process cycles: 5 cycles to 3 cycles.
- Cross-connect audit cycle: 3 days to 1 day.
- Fault backup route lookup: 10 minutes to 1 second.
All benchmark values are strictly faithful to original field
measurements. Deployments are validated across 6+ tier-1 carrier
regional and provincial networks encompassing high-density metro core
and distributed fiber nodes, with 38 pilot sites digitally transformed.
About Kingneed
Kingneed is an electronics manufacturer founded in 1995 in Zhongshan,
offering more than 30 years of experience in smart hardware, IoT
terminals, custom gift manufacturing and end-to-end contract
manufacturing services.
Frequently Asked Questions
What does the Kingneed RFID fiber management kit consist of?
Four pieces work together: passive RFID clip-on tags that carry a digital ID for each port, a rack-mounted auto-scanner that reads a full frame in one pass, a secure LAN gateway that uploads the data, and a central NMS / cloud OSS platform that turns the readings into a fiber path digital twin. The hardware fits standard ODF and sub-rack frames.
How fast is a full frame scan?
About 20 seconds for 1,000+ ports. The scanner reads every tagged port in the frame in a single pass, so there is no port-by-port manual check.
Does deployment require rewiring or service downtime?
No. The kit is an overlay retrofit: tags clip onto existing patch cords and adapters and the scanner mounts in the rack. Live frames stay in service during installation.
How does it integrate with the DCIM or OSS we already run?
Through open APIs. Port occupancy, port mapping and plug or unplug events stream from the gateway into your existing systems, so the kit complements your current DCIM / OSS rather than replacing it.
What results have operators measured in the field?
Field survey and tagging dropped from 172 minutes to 30 minutes, information audit and entry from 112 minutes to 5 seconds, the cross-connect audit cycle from 3 days to 1 day, and fault backup route lookup from 10 minutes to 1 second.
Which environments is the solution designed for?
Carrier central offices and ODF frames, street cabinets and FDH sites, hyperscale and colocation data centers, high-density MMR (meet-me room) cross-connect floors, and enterprise or campus fiber networks.
What is included in the free ODF PoC kit?
One RFID auto-scanner, ten RFID clip-on tags and remote engineering guidance. The kit validates the digital twin result on a single frame, with setup typically taking about 20 minutes.
Who is Kingneed?
An electronics manufacturer founded in 1995 in Zhongshan, Guangdong, China, with more than 30 years of experience covering design, manufacturing, testing and delivery for smart hardware, IoT terminals and contract manufacturing programs.
Key Technical Specifications
| Specification | Value |
|---|
| Bulk scan capacity | 1,000+ ports per frame, about 20 seconds per full scan |
|---|
| Tag type | Passive RFID clip-on tags with snap-on digital IDs, no battery |
|---|
| Deployment method | Overlay retrofit on live ODF / MMR frames, no rewiring, no downtime |
|---|
| System integration | Open API to existing DCIM / OSS platforms |
|---|
| Field survey and tagging | 172 minutes to 30 minutes |
|---|
| Information audit and entry | 112 minutes to 5 seconds |
|---|
| Service provisioning | 1 day to 3 hours |
|---|
| Cross-connect audit cycle | 3 days to 1 day |
|---|
| Move / add / change design | 4 days to 1.5 days |
|---|
| Fault backup route lookup | 10 minutes to 1 second |
|---|
| Validation base | 6+ tier-1 carrier regional networks, 38 pilot sites digitally transformed |
|---|
Explore the Site
Contact
Email gao@kingneed.cn | Business hours Mon-Fri 9:00 AM - 6:00 PM (GMT+8) |
Address 3F, Building A, No. 88 Innovation Road, Zhongshan Torch High-Tech
Zone. This site requires JavaScript for the full interactive experience.